This model EZ-UP Center stand features our CHROME FOOT LEVER (the remainder of the stand and mount is black epoxy powder coating). This stand fits the 1989-2008 Harley-Davidson touring motorcycles which have been lowered in the FRONT and REAR. This model is 1 inch lower than the stock center stand and fits the factory lowered FLHX Street Glides, FLHRS Road King Customs, and any FL frame which has been lowered in the back with H-D profile shock absorbers and have also been lowered in the front with the H-D lowering spring kits.

Features:

Currently only for the Harley-Davidson touring models in three heights for standard suspensions, lowered rear suspension and lowered front and rear suspensions.
Click here for fitment information

Limited lifetime warranty. Click For Warranty Details

Mounts to the frame with two bolts in less than five minutes with a 3/4 inch wrench.

EZ-OFF by simply placing the bike in gear and driving off. Because the rear tire is not completely off the ground the bike can be driven off of this stand.

This EZ-UP stand allows the rider to easily place the bike on the stand while still on the bike.

Your tank will hold up to ½ gallon more fuel when parked in the upright position.

No frame or bike modification required.

By placing a 3/8 inch spacer (such as a piece of plywood) below the stand you will have the rear wheel free of the ground for free rotation and cleaning.

The load carrying points are only on the bottom of the frame rails.

Maintenance free stand with I-Glide self lubricating bushings at the pivot locations

Zinc plated axle

Stainless steel springs

Powder coated to match the frame

Made in the U.S.A.

Patent Pending.

All Wheeldock models are in stock, and are shipped UPS Ground. For other shipping options, please call us at (631) 803-6093. Shipping options up to Next-Day Air are available.

Shipping Weight: 8 pounds.

Click For Owners Manual

Note: If your bike has Kuryakyn adjustable passenger pegs part #7926, with the extended passenger board mount part #4537 which moves the left side foot board out in order to clear the Rinehart true dual exhaust systems you will need to call us as we make a special version for this setup with the foot lever on the right hand side. We build these in any height needed. Cost is still the same but it will add a few days for shipment.

Lowered Bikes - to determine if your bike has a lowered suspension measure the center-to-center dimension of the rear shock absorber mounting bolts. Stock height is 12¾ inches between centers and lowered shocks are 11¾ inches between centers. Also see our fitment guide here