Model #CS-09 Center Stand for STOCK Suspensions

$289.99

*** NEW FOR THE 2009 and 2010 MODELS ***

This model EZ-UP Center stand fits the standard height suspensions on the new 2009 Harley-Davidson touring motorcycles. This is the center stand needed for all FL touring bikes with stock suspensions and wheels. Finish is black epoxy powder coating with a chrome foot lever.

Features:

Currently only for the Harley-Davidson touring models in three heights for standard suspensions, lowered rear suspension and lowered front and rear suspensions.
Click here for fitment information

Limited lifetime warranty. Click For Warranty Details

Mounts to the frame with two bolts in less than five minutes with a 3/4 inch wrench.

EZ-OFF by simply placing the bike in gear and driving off. Because the rear tire is not completely off the ground the bike can be driven off of this stand.

This EZ-UP stand allows the rider to easily place the bike on the stand while still on the bike.

Your tank will hold up to ½ gallon more fuel when parked in the upright position.

No frame or bike modification required.

By placing a 3/8 inch spacer (such as a piece of plywood) below the stand you will have the rear wheel free of the ground for free rotation and cleaning.

The load carrying points are only on the bottom of the frame rails.

Maintenance free stand with I-Glide self lubricating bushings at the pivot locations

Zinc plated axle

Stainless steel springs

Powder coated to match the frame

Made in the U.S.A.

Patent Pending.

All Wheeldock models are in stock, and are shipped UPS Ground. For other shipping options, please call us at (631) 803-6093. Shipping options up to Next-Day Air are available.

Shipping Weight: 8 pounds.

Click For Owners Manual

Note: If your bike has Kuryakyn adjustable passenger pegs part #7926, with the extended passenger board mount part #4537 which moves the left side foot board out in order to clear the Rinehart true dual exhaust systems you will need to call us as we make a special version for this setup with the foot lever on the right hand side. We build these in any height needed. Cost is still the same but it will add a few days for shipment.

Lowered Bikes - to determine if your bike has a lowered suspension measure the center-to-center dimension of the rear shock absorber mounting bolts. Stock height is 12¾ inches between centers and lowered shocks are 11¾ inches between centers. Also see our fitment guide here